Command: bstat
Handler: do_bstat
Min level: 58
Min posn: any (dead)
Log: normal
Syntax: bstat (board filename)
BSTAT is used to display the fields of an individual board.
(see 'help bset' for an explanation of each field)
See Also: BSET BOARDS MAKEBOARD
Syntax: Bset <board filename> <field> <value>
Syntax: Bstat <board filename> (same room as board needs no args)
BSTAT will show the current setting for the statted board.
BSET will set new values for a given board.
Correct FIELD values for Bset are:
ovnum, read, post, remove, maxpost, filename, and type
read_group, post_group, extra_readers, and extra_removers
All boards will be type 1, except Nerif's mail board (type 2).
Action FIELD values include:
oremove, otake, olist, oread, ocopy, opost, and postmessg
These should be followed by the message to be sent to those
who are at the board, but not performing the action (similar
to mpechoaround). Postmessg is the only message that will be
seen by the actor of a Bset action value.
Add comments here ...